Re: Issues with beacon-0.9.58-2
The beacon info page says tang.doit.wisc.edu is at 144.92.177.28.
The hostname resolves to 144.92.254.243.
At UCSB we are seeing traffic for the group sourced from 144.92.254.244,
but there is no sender at that address seen by our beacon. This is the
only beacon group source that we have a route for in AS59.
Group: 233.4.200.23, Source count: 20, Group pkt count: 16053178
Source: 144.92.254.244/32, Forwarding: 65632/11/61/5, Other: 65632/0/0
-john
Michael Hare wrote:
> Hello-
>
> Does anyone else have massive problems with beacon-0.9.58-2?
>
> 1) After TCPDUMP, beacon appears to not be sending an IGMP join for the
> beacon group
>
> 2) The Abilene router proxy that my host, tang.doit.wisc.edu, is showing
> increasing packet counts for sourcing traffic to 233.4.200.23, but nobody
> seems to be receiving..? ag-bridge.vislab.uq.edu.au 130.102.78.144,
> minimally, seems to reached from us via Abilene.
>
> -Michael
>
> ============================W=========
> Michael Hare
> UW-Madison/WiscNet Network Engineering
> Desk: (608) 262-5236
> 24 Hr Noc: (608) 263-4188
>
>